THE ARGC-750 PAN & TILT is a compact and high-performance remote controlled Pan & Tilt head. The ARGC-750 Pan & Tilts ‘U' configuration benefits from the addition of a support arm increasing the unit's payload capacity up to 30 kg to provide portable, rugged and accurate accommodation. It is custom-made for the ARGC-750 system with fittings and vibration-free hardware, that will suit your application's high standards.
A standard and great feature of the ARGC-750 high performance motorized Pan & Tilt is its Slip Ring, allowing the operator to perform 360 degrees surveillance from a single location.
Support arm spacers are available to further increase the unit's versatility when required. The Pan & Tilt units can be installed on a tripod or a mast for a permanent installation.
Each unit is tested in our factory to validate the specifications accuracy.
- Payloads up to 30 kg
- Fully environmentally-sealed
- Two independent drive units
- Slip ring for continuous rotation
- Designed to comply with MIL-STD-810E
- RS-232/422/485 option
- Rugged design
- Compact
| Custom-made umbilical cables: one umbilical between the camera and the Pan & Tilt, adjusted as short as possible to consequently allow the camera to move freely. A second umbilical cable to connect to the master control unit. |
| An Obzerv validation protocol is performed in our factory, testing speed and Pan & Tilt limits. |
| Obzerv provides integrated software to control both the camera and the Pan & Tilt. |
| An optional Joystick controls the camera and the Pan & Tilt. |
| A proprietary-design spacer is added in the Pan & Tilt structure to perfectly fit the ARGC-2400 in the arm. |